High Quality Interior & Exterior Residential Painting Service - Vancouver B.C.

• Survey the building and note areas of loose paint.
• Before scraping, install plastic around perimeter to protect ground from lead-based paint chips
• Use a quality scraper to remove all loose paint by applying even pressure and scraping the long direction of the board.
• Wash the surface with TSP, garden hose and brush.
• Rinse all surfaces.
• Depending on weather conditions, wait at least 24 hours for the siding to dry.
• Check for gaps between siding and trim and between trim and foundation.
• Fill any siding gaps wider than 1/8 inch with a quality latex caulk. Fill gaps between the foundation and sill plate with an expanding spray foam insulation or caulk for smaller gaps.
• Apply a thin coat of oil-based primer to all raw wood.
• Apply first coat of finish paint. After dry, follow up with second coat as necessary.

Comments or questions are welcome.

* indicates required field

Name:*

Email:*

Subject:*

Message:*

CAPTCHA Code:*

Where do you get your color inspiration from?

The colors of nature inspire all.